8010co chassis air filter replacement
3. Apply even force at both the corners and gently slide the new filter into the
4. Replace the bottom front of the bezel.
Mounting the air bezel
This procedure provides instructions to mount the air bezel in the 8010co chassis.
To mount the bottom-front bezel of the 8010co chassis, choose one of the following procedures
for the specified air bezel.
Prerequisites
Ensure that the air filter is installed correctly in the chassis.
Important:
The 8005DI (Dual Input) power supply in the 8010co chassis requires a modified air-intake
bezel 321325-A.
100
Routine Maintenance
The following figure shows how to install the air filter in the 8010co chassis.
housing.
March 2011