Replacing The Fan Tray In An 8010Co Chassis - Avaya 8800 Maintenance Manual
Ethernet routing switch
Hide thumbs
Also See for 8800:
- Troubleshooting manual (484 pages) ,
- Planning and engineering, network design (327 pages) ,
- Planning and engineering (306 pages)
Table of Contents
Advertisement
Fan tray and Cooling module replacement
Replacing the fan tray in an 8010co chassis
The 8010co chassis contains two fan trays.
Replace the fan tray if it fails to work.
Procedure steps
Important:
You can replace a fan tray in the 8010co chassis with the power on or off.
Caution:
Electrostatic discharge can damage hardware. Follow the procedure in this section to protect
your equipment from damage.
Procedure steps
1. Locate the antistatic wrist strap in the shipping container.
2. Verify that the cable is attached to the wrist strap.
3. Place the strap around your wrist.
4. Adjust the strap to ensure that the metal buckle inside the strap touches your
5. Insert the plug into the ground port on the front of the chassis.
86
Routine Maintenance
skin.
March 2011
Advertisement
Table of Contents
