Cleaning Fans In An 8010Co Chassis - Avaya 8800 Maintenance Manual

Cleaning fans in an 8010co chassis

Figure 6: Fan tray for the 8010co chassis
chassis. The 8010co chassis has two fan trays installed at the top of the chassis.
Figure 6: Fan tray for the 8010co chassis
Caution:
Risk of equipment damage
Avaya recommends that you power down the chassis before you clean fans and vents. If
you operate a system for more than five minutes without a operational fan tray or cooling
module, equipment damage can occur.
Use the following procedure to clean the 8010co chassis fans and ensure optimum system
cooling.
Procedure steps
1. Locate the antistatic wrist strap in the shipping container.
2. Verify that the cable is attached to the wrist strap.
3. Place the strap around your wrist.
4. Adjust the strap to ensure that the metal buckle inside the strap touches your
Routine Maintenance
Electrostatic alert:
Risk of equipment damage
Electrostatic discharge can damage hardware. Follow the procedure in this
section to protect your equipment from damage.
skin.
Cleaning fans in an 8010co chassis
on page 29 illustrates the fan tray for the 8010co
March 2011 29