Operation
6.7 Communication according to PROFIdrive
6.7.2
Application classes
Description
There are different application classes for PROFIdrive according to the scope and type of the
application processes. PROFIdrive features a total of 6 application classes, 4 of which are
discussed here.
Application class 1 (standard drive)
In the most basic case, the drive is controlled via a speed setpoint by means of
PROFIBUS/PROFINET. In this case, speed control is fully handled in the drive controller.
Typical application examples include simple frequency converters for controlling pumps and
fans.
Figure 6-29
312
Application class 1
Converter cabinet units
Operating Instructions, 03/2012, A5E03263466A