Siemens SINAMICS G150 Operating Instructions Manual page 211

Figure 5-8
⇒ Click Continue > to set up a drive unit in the project wizard.
Figure 5-9
⇒ Choose the following data from the list fields:
Device: Sinamics
Type: G150 CU320-2 DP or G150 CU320-2 PN with option K95
Version: 4.5
Bus address: the corresponding bus address for the cabinet unit
The entry in Name: field is user defined.
⇒ Click Insert
The selected drive unit is displayed in a preview window in the project wizard.
Converter cabinet units
Operating Instructions, 03/2012, A5E03263466A
Setting the interface
Inserting the drive unit
5.3 Procedure for commissioning via STARTER
Commissioning
209