Fsdownload Command - Xerox DocuPrint N2025 System Administrator Manual

FSDOWNLOAD
Command
Syntax @PJL FSDOWNLOAD FORMAT:BINARY [SIZE=int] [NAME = "pathname"] [<CR>]
<LF><binary data><ESC>%-12345X
Parameters
Parameter
SIZE=integer
NAME="pathname"
SIZE =
integer
downloaded. The size indicates the number of bytes immediately following the <LF> to
the next UEL command.
NAME =
font named "fontname" to the printer or = 0:\pcl\macros\<macroname> to download
a macro named "macroname" to the printer. <fontname>/<macroname> can be any
combination of up to 40 alphanumeric characters.
<binary data> — This is the binary file data to be downloaded, such as font files and
macro data.
Use of 1 rather than 0 in the "pathname" will download the font or macro to the
Flash Memory rather than to the hard drive.
The FSDOWNLOAD command is used to download fonts
or macros to the printer's file system. If a file with the
same name exists, the downloaded file overwrites it.
Functional Range
0 to 2
ASCII 01 thru 255
— The size variable indicates the number of bytes in the file to be
"pathname" — where "pathname" = 0:\pcl\fonts\<fontname> to download a
Chapter 3: Using the Hard Drive and Flash Memory
Downloading Fonts, Forms and Macros
31
- 1
Default
N/A
N/A
3-5