Cisco ASA 5505 Configuration Manual page 1234

Monitoring Active/Standby Failover
Screen
Monitoring > Properties > Failover > Graphs
Cisco ASA 5500 Series Configuration Guide using ASDM
59-16
Purpose
The Graphs pane lets you view failover statistics in graph and table form.
In multiple context mode, the Graphs pane is only available in the admin
context. The information in the graphs relate to Stateful Failover only.
Available Graphs for—Lists the types of statistical information
available for monitoring. You can choose up to four statistic types to
display in one graph window. Double-clicking a statistic type in this field
moves it to the Selected Graphs field. Single-clicking a statistic type in
this field selects the entry. You can select multiple entries.
The following types of statistics are available in graph or table format in
the graph window. They show the number of packets sent to and received
from the other unit in the failover pair.
RPC services information—Displays the adaptive security appliance
•
RPC service information.
TCP Connection Information—Displays the adaptive security
•
appliance TCP connection information.
UDP Connection Information—Displays the adaptive security
•
appliance UDP connection information.
ARP Table Information—Displays the adaptive security appliance
•
ARP table information.
L2Bridge Table Information—(Transparent Firewall Mode Only)
•
Displays the layer 2 bridge table packet counts.
Xmit Queue—(Single Mode Only) Displays the current, maximum,
•
and total number of packets transmitted.
Receive Queue—(Single Mode Only) Displays the current,
•
maximum, and total number of packets received.
Graph Window—Shows the graph window name to which you want to
add a statistic type. If you have a graph window already open, a new graph
window is listed by default. If you want to add a statistic type to an
already open graph, select the open graph window name. The statistics
already included in the graph window are shown in the Selected Graphs
field, to which you can add additional types (up to a maximum of four
types per window).
Add—Click this button to move the selected entries in the Available
Graphs for field to the Selected Graphs field.
Remove—Removes the selected statistic type from the Selected Graphs
field.
Selected Graphs—Shows the statistic types you want to show in the
selected graph window. You can include up to four types. Double-clicking
a statistic type in this field removes the selected statistic type from the
field. Single-clicking a statistic type in this field selects the statistic type.
You can select multiple statistic types.
Show Graphs—Click this button to display a new or updated graph
window with the selected statistics.
Chapter 59 Configuring Active/Standby Failover
OL-20339-01