Cisco ASA 5505 Configuration Manual page 1455

Clientless SSL VPN End User Set-up
This section is for the system administrator who sets up Clientless (browser-based) SSL VPN for end
users. It summarizes configuration requirements and tasks for the user remote system. It also specifies
information to communicate to users to get them started using Clientless SSL VPN. This section includes
the following topics:
•
•
•
•
We assume you have already configured the adaptive security appliance for Clientless SSL VPN.
Note
Requiring Usernames and Passwords
Depending on your network, during a remote session users might have to log in to any or all of the
following: the computer itself, an Internet service provider, Clientless SSL VPN, mail or file servers, or
corporate applications. Users might have to authenticate in many different contexts, requiring different
information, such as a unique username, password, or PIN.
Table 66-1
Table 66-1 Usernames and Passwords to Give to Clientless SSL VPN Users
Login Username/
Password Type
Computer
Internet Service Provider
Clientless SSL VPN
File Server
Corporate Application Login Access firewall-protected internal server Using the Clientless SSL VPN web browsing
Mail Server
OL-20339-01
Requiring Usernames and Passwords
Communicating Security Tips
Configuring Remote Systems to Use Clientless SSL VPN Features
Capturing Clientless SSL VPN Data
lists the type of usernames and passwords that Clientless SSL VPN users might need to know.
Purpose
Access the computer
Access the Internet
Access remote network
Access remote file server
Access remote mail server via Clientless
SSL VPN
C H A P T E R
Entered When
Starting the computer
Connecting to an Internet service provider
Starting a Clientless SSL VPN session
Using the Clientless SSL VPN file browsing
feature to access a remote file server
feature to access an internal protected website
Sending or receiving e-mail messages
Cisco ASA 5500 Series Configuration Guide using ASDM
66
66-1