Cisco ASA 5505 Configuration Manual page 1185

Chapter 56 Configuring Trend Micro Content Security
A summary of the status of commands that were sent to the device appears.
Click Close to close this screen, and then click Next.
Step 4
A message appears indicating that the CSC SSM has been activated and is ready for use.
(Optional) Click Cancel to exit the CSC Setup Wizard without saving any of the selected settings. If you
Step 5
click Cancel, a dialog box appears to confirm your decision.
What to Do Next
See the
Using the CSC SSM GUI
This section describes how to configure features using the CSC SSM GUI, and includes the following
topics:
•
•
•
•
Web
To access the CSC SSM, you must reenter the CSC SSM password. Sessions in the CSC SSM browser
Note
time out after ten minutes of inactivity. If you close the CSC SSM browser and click another link in
ASDM, you are not prompted for the CSC SSM password again, because one session is already open.
To view whether or not web-related features are enabled and access the CSC SSM GUI for configuring
these features, perform the following steps:
Choose Configuration > Trend Micro Content Security > Web.
Step 1
The URL Blocking and Filtering area is display-only and shows whether or not URL blocking is enabled
on the CSC SSM.
Click Configure URL Blocking to open a screen for configuring URL blocking on the CSC SSM.
Step 2
The URL Filtering area is display-only and shows whether or not URL filtering is enabled on the CSC
SSM.
Click Configure URL Filtering to open a screen for configuring URL filtering rules on the CSC SSM.
Step 3
The File Blocking area is display-only and shows whether or not URL file blocking is enabled on the
CSC SSM.
Click Configure File Blocking to open a screen for configuring file blocking settings on the CSC SSM.
Step 4
The HTTP Scanning area is display-only and shows whether or not HTTP scanning is enabled on the
CSC SSM.
OL-20339-01
"Using the CSC SSM GUI" section on page
Web, page 56-13
Mail, page 56-14
File Transfer, page 56-15
Updates, page 56-16
56-13.
Cisco ASA 5500 Series Configuration Guide using ASDM
Using the CSC SSM GUI
56-13