Cisco ASA 5505 Configuration Manual page 1176

CSC SSM Setup
CSC SSM Setup
The CSC Setup Wizard lets you configure basic operational parameters for the CSC SSM. You must
complete this wizard at least once before you can configure options in each screen separately. After you
complete the CSC Setup Wizard, you can modify each screen individually without using this wizard
again.
Additionally, you cannot access the panes under Configuration > Trend Micro Content Security > CSC
Setup or under Monitoring > Trend Micro Content Security > Content Security until you complete the
CSC Setup Wizard. If you try to access these panes before completing this wizard, a dialog box appears
and lets you access the wizard directly to complete the configuration.
This section includes the following topics:
•
•
•
•
•
•
•
Activation/License
The Activation/License pane lets you review or renew activation codes for the CSC SSM Base License
and the Plus License.
You can use ASDM to configure CSC licenses only once each for the two licenses. Renewed license
activation codes are downloaded automatically with scheduled software updates. Links to the licensing
status pane and the CSC UI home pane appear at the bottom of this window. The serial number for the
assigned license is filled in automatically.
To review license status or renew a license, perform the following steps:
Step 1 Choose Configuration > Trend Micro Content Security > CSC Setup > Activation/License.
Step 2 The Activation/License pane shows the following display-only information for the Base License and the
Plus License:
•
•
•
•
To review license status or renew your license, click the link provided.
Step 3
To go to the CSC home pane in ASDM, click the link provided.
Step 4
Cisco ASA 5500 Series Configuration Guide using ASDM
56-4
Activation/License, page 56-4
IP Configuration, page 56-5
Host/Notification Settings, page 56-5
Management Access Host/Networks, page 56-6
Password, page 56-7
Restoring the Default Password, page 56-8
Wizard Setup, page 56-8
The name of the component.
The activation code for the corresponding Product field.
The status of the license. If the license is valid, the expiration date appears. If the expiration date
has passed, this field indicates that the license has expired.
The maximum number of network devices that the Base License supports. The Plus License does
not affect the number of network devices supported; therefore, the Nodes field does not appear in
the Plus License area.
Chapter 56 Configuring Trend Micro Content Security
OL-20339-01