Cisco ASA 5505 Configuration Manual page 1167

Chapter 55 Configuring the Content Security and Control Application on the CSC SSM
Feature History for the CSC SSM
Table 55-2
backwards-compatible with multiple platform releases, so the specific ASDM release in which support
was added is not listed.
Table 55-2 Feature History for the CSC SSM
Feature Name Platform Releases
CSC SSM 7.0(1)
CSC SSM 8.1(1) and 8.1(2)
CSC syslog format 8.3(1)
Clearing CSC 6.3(2)
events
OL-20339-01
lists each feature change and the platform release in which it was implemented. ASDM is
Feature Information
The CSC SSM runs Content Security and Control software, which provides
protection against viruses, spyware, spam, and other unwanted traffic.
The CSC Setup Wizard enables you to configure the CSC SSM in ASDM. The
following screen was introduced: Configuration > Trend Micro Content Security
> CSC Setup.
This feature is not supported on the ASA 5580.
CSC syslog format is consistent with the adaptive security appliance syslog
format. Syslog message explanations have been added to the Cisco Content
Security and Control (CSC) SSM Administrator Guide. The source and destination
IP information has been added to the ASDM Log Viewer GUI. All syslog messages
include predefined syslog priorities and cannot be configured through the CSC
SSM GUI.
Support for clearing CSC events in the Latest CSC Security Events pane has been
added. The following screen was modified: Home > Content Security.
Cisco ASA 5500 Series Configuration Guide using ASDM
Feature History for the CSC SSM
55-15