Cisco ASA 5505 Configuration Manual page 1633

Chapter 71 Configuring Logging
Feature History for Logging
Table 71-2
backwards-compatible with multiple platform releases, so the specific ASDM release in which support
was added is not listed.
Table 71-2 Feature History for Logging
Feature Name
Logging
Rate limit
Logging list
Secure logging
Logging class
Logging class and saved
logging buffers
Password encryption
Log viewers
OL-20339-01
lists each feature change and the platform release in which it was implemented. ASDM is
Platform
Releases Feature Information
7.0(1) Provides adaptive security appliance network logging information through
various output destinations, and includes the option to view and save log files.
The Configuration > Device Management > Logging > Logging Setup screen
was introduced.
7.0(4) Limits the rate at which syslog messages are generated.
The Configuration > Device Management > Logging > Rate Limit screen was
modified.
7.2(1) Creates a logging list to use in other commands to specify messages by various
criteria (logging level, event class, and message IDs).
The Configuration > Device Management > Logging > Event Lists screen was
modified.
8.0(2) Specifies that the connection to the remote logging host should use SSL/TLS.
This option is valid only if the protocol selected is TCP.
The Configuration > Device Management > Logging > Syslog Server screen was
modified.
8.0(4), 8.1(1) Added support for the ipaa event class of logging messages.
The Configuration > Device Management > Logging > Logging Filters screen
was modified.
8.2(1) Added support for the dap event class of logging messages.
Added support to clear the saved logging buffers (ASDM, internal, FTP, and
flash).
The Configuration > Device Management > Logging > Logging Setup screen
was modified.
8.3(1) Added support for password encryption.
8.3(1) The source and destination IP addresses were added to the log viewers.
Cisco ASA 5500 Series Configuration Guide using ASDM
Feature History for Logging
71-25