Cisco ASA 5505 Configuration Manual page 1654

Configuring SNMP
Configuring SNMP
This section describes how to configure SNMP and includes the following topics:
•
•
•
•
•
•
Enabling SNMP
The SNMP agent that runs on the adaptive security appliance performs two functions:
•
•
To enable the SNMP agent and identify an NMS that can connect to the SNMP server, see the following
pane:
Path
Configuration > Device Management
> Management Access > SNMP
What to Do Next
See the
Configuring an SNMP Management Station
To receive requests from the adaptive security appliance. you must configure an SNMP management
station in ASDM.
To configure an SNMP management station, perform the following steps:
Choose Configuration > Device Management > Management Access > SNMP.
Step 1
In the SNMP Management Stations pane, click Add.
Step 2
The Add SNMP Host Access Entry dialog box appears.
From the Interface Name drop-down list, choose the interface on which the SNMP host resides.
Step 3
In the IP Address field, enter the SNMP host IP address.
Step 4
In the UDP Port field, enter the SNMP host UDP port, or keep the default, port 162.
Step 5
Cisco ASA 5500 Series Configuration Guide using ASDM
73-6
Enabling SNMP, page 73-6
Configuring an SNMP Management Station, page 73-6
Configuring SNMP Traps, page 73-7
Compiling Cisco Syslog MIB Files, page 73-8
Using SNMP Version 1 or 2c, page 73-9
Using SNMP Version 3, page 73-9
Replies to SNMP requests from NMSs.
Sends traps (event notifications) to NMSs.
Purpose
Ensures that the SNMP server on the adaptive security appliance is enabled. By
default, the SNMP server is enabled.
"Configuring an SNMP Management Station" section on page
Chapter 73 Configuring SNMP
73-6.
OL-20339-01