Cisco ASA 5505 Configuration Manual page 1668

Feature History for Smart Call Home
Path
Tools > Command Line Interface
Type show shun, then click Send.
Tools > Command Line Interface
Type show smart-call- home alert-group, then click Send.
Tools > Command Line Interface
Type show threat-detection rate, then click Send.
Tools > Command Line Interface
Type show threat-detection rate, then click Send.
Tools > Command Line Interface
Type show threat-detection shun, then click Send.
Tools > Command Line Interface
Type show threat-detection statistics, then click Send.
Feature History for Smart Call Home
Table 1
ASDM is backwards-compatible with multiple platform releases, so the specific ASDM release in which
support was added is not listed.
Table 1 Feature History for Smart Call Home
Feature Name
Smart Call Home
Cisco ASA 5500 Series Configuration Guide using ASDM
74-6
lists each feature change and the platform release in which it was implemented.
Platform
Releases
8.2(2)
Purpose
Shows shun information.
Shows the current status of Smart Call Home alert groups.
Shows basic threat detection statistics.
Show current attackers and targets.
Shows currently shunned hosts.
Shows statistics for hosts, ports, and protocols.
Feature Information
The Smart Call Home feature offers proactive diagnostics
and real-time alerts on the adaptive security appliance, and
provides higher network availability and increased
operational efficiency.
The following screen was introduced:
Configuration> Device Management> Smart Call Home
Chapter 74 Configuring Smart Call Home
OL-20339-01