Cisco ASA 5505 Configuration Manual page 1702

Asa 5500 series
Hide thumbs Also See for ASA 5505:
Table of Contents

Advertisement

Other Troubleshooting Tools
Click Close, and then click Finish to exit the wizard.
Step 24
Ingress Traffic Selector
To configure the ingress interface, source and destination hosts/networks, and the protocol for packet
capture, perform the following steps:
Enter the ingress interface name.
Step 1
Enter the ingress source host and network.
Step 2
Enter the ingress destination host and network.
Step 3
Enter the protocol type to capture. Available protocols are ah, eigrp, esp, gre, icmp, icmp6, igmp, igrp,
Step 4
ip, ipinip, nos, ospf, pcp, pim, snp, tcp, or udp.
a.
b.
Egress Traffic Selector
To configure the egress interface, source and destination hosts/networks, and source and destination port
services for packet capture, perform the following steps:
Enter the egress interface name.
Step 1
Step 2
Enter the egress source host and network.
Step 3
Enter the egress destination host and network.
The protocol type selected during the ingress configuration is already listed.
Buffers
To configure the packet size, buffer size, and use of the circular buffer for packet capture, perform the
following steps.
Cisco ASA 5500 Series Configuration Guide using ASDM
76-10
Enter the ICMP type for ICMP only. Available types include all, alternate address, conversion-error,
echo, echo-reply, information-reply, information-request, mask-reply, mask-request,
mobile-redirect, parameter-problem, redirect, router-advertisement, router-solicitation,
source-quench, time-exceeded, timestamp-reply, timestamp-request, traceroute, or unreachable.
Specify the source and destination port services for the TCP and UDP protocols only. Available
options include the following:
To include all services, choose All Services.
To include a service group, choose Service Groups.
To include a specific service, choose one of the following: aol, bgp, chargen, cifx, citrix-ica,
ctiqbe, daytime, discard, domain, echo, exec, finger, ftp, ftp-data, gopher, h323, hostname, http,
https, ident, imap4, irc, kerberos, klogin, kshell, ldap, ldaps, login, lotusnotes, lpd, netbios-ssn,
nntp, pcanywhere-data, pim-auto-rp, pop2, pop3, pptp, rsh, rtsp, sip, smtp, sqlnet, ssh, sunrpc,
tacacs, talk, telnet, uucp, or whois.
Chapter 76
Troubleshooting
OL-20339-01

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Asa 5510Asa 5540Asa 5520Asa 5550Asa 5580

Table of Contents