Cisco ASA 5505 Configuration Manual page 912

Asa 5500 series
Hide thumbs Also See for ASA 5505:
Table of Contents

Advertisement

XDMCP Inspection
Firewall Mode
Routed
Add/Edit SNMP Map
The Add/Edit SNMP Map dialog box lets you create a new SNMP map for controlling SNMP application
inspection.
Fields
Modes
The following table shows the modes in which this feature is available:
Firewall Mode
Routed
XDMCP Inspection
XDMCP inspection is enabled by default; however, the XDMCP inspection engine is dependent upon
proper configuration of the established command.
XDMCP is a protocol that uses UDP port 177 to negotiate X sessions, which use TCP when established.
For successful negotiation and start of an XWindows session, the adaptive security appliance must allow
the TCP back connection from the Xhosted computer. To permit the back connection, use the
established command on the adaptive security appliance. Once XDMCP negotiates the port to send the
display, The established command is consulted to verify if this back connection should be permitted.
During the XWindows session, the manager talks to the display Xserver on the well-known port 6000 |
n. Each display has a separate connection to the Xserver, as a result of the following terminal setting.
setenv DISPLAY Xserver:n
where n is the display number.
When XDMCP is used, the display is negotiated using IP addresses, which the adaptive security
appliance can NAT if needed. XDCMP inspection does not support PAT.
Cisco ASA 5500 Series Configuration Guide using ASDM
40-18
Security Context
Transparent Single
SNMP Map Name—Defines the name of the application inspection map.
SNMP version 1—Enables application inspection for SNMP version 1.
SNMP version 2 (party based)—Enables application inspection for SNMP version 2.
SNMP version 2c (community based)—Enables application inspection for SNMP version 2c.
SNMP version 3—Enables application inspection for SNMP version 3.
Security Context
Transparent Single
Chapter 40
Configuring Inspection for Management Application Protocols
Multiple
Context
System
Multiple
Context
System
OL-20339-01

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Asa 5510Asa 5540Asa 5520Asa 5550Asa 5580

Table of Contents