Cisco ASA 5505 Configuration Manual page 1397

Chapter 64 General VPN Setup
Firewall Mode
Routed
•
Select Address Pools
The Select Address Pools dialog box shows the pool name, starting and ending addresses, and subnet
mask of address pools available for client address assignment and lets you add, edit, or delete entries
from that list. To access this dialog box, choose Config > Remote Access VPN > Network (Client)
Access > IPsec or SSL VPN Connections > Add or Edit > Advanced > Client Addressing > Add or Edit
> Select.
Fields
Use the following descriptions to assign values to the fields in this dialog box:
•
•
•
•
Modes
The following table shows the modes in which this feature is available:
Firewall Mode
Routed
•
Add or Edit IP Pool
The Add or Edit IP Pool dialog box lets you specify or modify a range of IP addresses for client address
assignment. To access this dialog box, choose Config > Remote Access VPN > Network (Client) Access
> IPsec or SSL VPN Connections > Add or Edit > Advanced > Client Addressing > Add or Edit > Select
> Add or Edit.
Fields
Use the following descriptions to assign values to the fields in this dialog box:
•
•
•
•
OL-20339-01
Security Context
Transparent Single
— •
Add—Opens the Add IP Pool dialog box, on which you can configure a new IP address pool.
Edit—Opens the Edit IP Pool dialog box, on which you can modify a selected IP address pool.
Delete—Removes the selected address pool. There is no confirmation or undo.
Assign—Displays the address pool names that remained assigned to the interface. Double-click each
unassigned pool you want to add to the interface. The Assign field updates the list of pool
assignments.
Security Context
Transparent Single
—
•
Name—Specifies the name assigned to the IP address pool.
Starting IP Address—Specifies the first IP address in the pool.
Ending IP Address—Specifies the last IP address in the pool.
Subnet Mask—Selects the subnet mask to apply to the addresses in the pool.
Mapping Certificates to IPsec or SSL VPN Connection Profiles
Multiple
Context System
— —
Multiple
Context System
— —
Cisco ASA 5500 Series Configuration Guide using ASDM
64-87