Cisco ASA 5505 Configuration Manual page 1462

Capturing Clientless SSL VPN Data
Creating a Capture File
Perform the following steps to capture data about a Clientless SSL VPN session to a file.
To start the Clientless SSL VPN capture utility, use the capture command from privileged EXEC mode.
Step 1
capture capture_name type webvpn user webvpn_username
where:
•
•
The capture utility starts.
A user logs in to begin a Clientless SSL VPN session. The capture utility is capturing packets.
Step 2
Stop the capture by using the no version of the command.
no capture capture_name
The capture utility creates a capture_name.zip file, which is encrypted with the password koleso.
Send the .zip file to Cisco Systems, or attach it to a Cisco TAC service request.
Step 3
To look at the contents of the .zip file, unzip it using the password koleso.
Step 4
The following example creates a capture named hr, which captures Clientless SSL VPN traffic for user2
to a file:
hostname# capture hr type webvpn user user2
WebVPN capture started.
capture name
user name
hostname# no capture hr
Using a Browser to Display Capture Data
Perform the following steps to capture data about a Clientless SSL VPN session and view it in a browser.
To start the Clientless SSL VPN capture utility, use the capture command from privileged EXEC mode.
Step 1
capture capture_name type webvpn user webvpn_username
where:
•
•
The capture utility starts.
A user logs in to begin a Clientless SSL VPN session. The capture utility is capturing packets.
Step 2
Stop the capture by using the no version of the command.
Open a browser and in the address box enter
Step 3
Cisco ASA 5500 Series Configuration Guide using ASDM
66-8
capture_name is a name you assign to the capture, which is also prepended to the name of the
capture files.
webvpn_user is the username to match for capture.
hr
user2
capture_name is a name you assign to the capture, which is also prepended to the name of the
capture files.
webvpn_username is the username to match for capture.
Chapter 66 Clientless SSL VPN End User Set-up
OL-20339-01