Cisco ASA 5505 Configuration Manual page 1336

ACL Manager
Firewall Mode
Routed
•
ACLs
This dialog box lets you configure ACLs for Clientless SSL VPN.
Fields
•
•
•
•
•
•
•
•
•
•
•
•
•
Modes
The following table shows the modes in which this feature is available:
Firewall Mode
Routed
•
Cisco ASA 5500 Series Configuration Guide using ASDM
64-26
Security Context
Transparent Single
— •
View (Unlabeled)—Indicates whether the selected entry is expanded (minus sign) or contracted
(plus sign).
# column—Specifies the ACE ID number.
Enable—Indicates whether this ACL is enabled or disabled. You can enable or disable the ACL
using this check box.
Action—Specifies whether this ACL permits or denies access.
Type—Specifies whether this ACL applies to a URL or a TCP address/port.
Filter—Specifies the type of filter being applied.
Syslog Level (Interval)—Specifies the syslog parameters for this ACL.
Time Range—Specifies the name of the time range, if any, for this ACL. The time range can be a
single interval or a series of periodic ranges.
Description—Specifies the description, if any, of the ACL.
Add ACL—Displays the Add Web Type ACL dialog box, in which you can specify an ACL ID.
Add ACE—Displays the Add Web Type ACE dialog box, in which you specify parameters for the
named ACL. This button is active only if there are one or more entries in the Web Type ACL table.
Edit ACE/Delete—Click to edit or delete the highlighted ACL or ACE. When you delete an ACL,
you also delete all of its ACEs. No warning or undelete.
Move Up/Move Down—Highlight an ACL or ACE and click these buttons to change the order of
ACLs and ACEs. The adaptive security appliance checks ACLs and their ACEs in priority order
according to their position in the ACLs list box until it finds a match.
Security Context
Transparent Single
—
•
Multiple
Context System
— —
Multiple
Context System
— —
Chapter 64 General VPN Setup
OL-20339-01