Cisco ASA 5505 Configuration Manual page 1330

ACL Manager
•
•
•
Modes
The following table shows the modes in which this feature is available:
Firewall Mode
Routed
•
Add TCP Service Group
The Add TCP Service Group dialog box lets you configure a new a TCP service group or port to add to
the browsable source or destination port list for this protocol in this rule. Selecting a member of either
the Members not in Group or the Members in Group list activates the Add and Remove buttons.
Fields
•
•
•
•
•
•
•
•
Modes
The following table shows the modes in which this feature is available:
Firewall Mode
Routed
•
Cisco ASA 5500 Series Configuration Guide using ASDM
64-20
Filter/Clear—Specifies a filter criterion that you can use to search for items in the Name list, thus
displaying only those items that match that criterion. When you make an entry in the Filter field, the
Filter button becomes active. Clicking the Filter button performs the search. After you perform the
search, the Filter button is dimmed, and the Clear button becomes active. Clicking the Clear button
clears the filter field and dims the Clear button.
Type—Determines the type of object to use as the source or destination for this rule. Selections are
IP Address Objects, IP Names, Network Object Groups, and All. The contents of the table following
this field change, depending upon your selection.
Name—Lists the predefined protocols and service groups for your selection.
Security Context
Transparent Single
—
•
Group Name—Specifies the name of the new TCP service group.
Description—(Optional) Provides a brief description of this group.
Members not in Group—Presents the option to select either a service/service group or a port number
to add to the Members in Group list.
Service/Service Group—Selects the option to select the name of a TCP service or service group to
add to the Members in Group list.
Port #—Selects the option to specify a range of port numbers to add to the Members in Group list.
Add—Moves a selected item from the Members not in Group list to the Members in Group list.
Remove—Moves a selected item from the Members in Group list to the Members not in Group list.
Members in Group—Lists the members already configured in this service group.
Security Context
Transparent Single
—
•
Multiple
Context System
— —
Multiple
Context System
— —
Chapter 64 General VPN Setup
OL-20339-01