Cisco ASA 5505 Configuration Manual page 1341

Chapter 64 General VPN Setup
View/Config Banner
The View/Config Banner dialog box lets you enter up to 500 characters of text in the text field to display
as a banner for the specified client.
A carriage return/line feed, created by pressing Enter, counts as 2 characters.
Note
Modes
The following table shows the modes in which this feature is available:
Firewall Mode
Routed
•
Add/Edit Internal Group Policy > Client Configuration > Cisco Client Parameters
This dialog box configures client attributes that are specific to Cisco clients, including password storage,
enabling or disabling IPsec over UDP and setting the UDP port number, and configuring IPsec backup
servers.
Fields
•
Note
•
•
•
•
•
Modes
The following table shows the modes in which this feature is available:
OL-20339-01
Security Context
Transparent Single
—
•
Store Password on Client System—Enables or disables storing the password on the client system.
Storing the password on a client system can constitute a potential security risk.
IPsec over UDP—Enables or disables using IPsec over UDP.
IPsec over UDP Port—Specifies the UDP port to use for IPsec over UDP.
IPsec Backup Servers—Activates the Server Configuration and Server IP Addresses fields, so you
can specify the UDP backup servers to use if these values are not inherited.
Server Configuration—Lists the server configuration options to use as an IPsec backup server. The
available options are: Keep Client Configuration (the default), Use the Backup Servers Below, and
Clear Client Configuration.
Server Addresses (space delimited)—Specifies the IP addresses of the IPsec backup servers. This
field is available only when the value of the Server Configuration selection is Use the Backup
Servers Below.
Multiple
Context System
— —
Cisco ASA 5500 Series Configuration Guide using ASDM
ACL Manager
64-31