Section 8 Parts; Parts Ordering; Parts Kits - Fisher FIELDVUE DVC6200 Instruction Manual

Instruction Manual
D103409X012
Section 8 Parts88

Parts Ordering

Whenever corresponding with your Emerson Process Management sales office about this equipment, always mention
the controller serial number. When ordering replacement parts, refer to the 11‐character part number of each
required part as found in the following parts list. Part numbers are shown for kits and recommended spares only. For
part numbers not shown, contact your Emerson Process Management sales office.
WARNING
Use only genuine Fisher replacement parts. Components that are not supplied by Emerson Process Management should
not, under any circumstances, be used in any Fisher instrument. Use of components not supplied by Emerson Process
Management may void your warranty, might adversely affect the performance of the instrument, and could cause personal
injury and property damage.

Parts Kits

Kit Description
1* Elastomer Spare Parts Kit (kit contains parts to
service one digital valve controller)
Standard
Extreme Temperature option
(fluorosilicone elastomers)
2* Small Hardware Spare Parts Kit (kit contains parts
to service one digital valve controller)
3* Seal Screen Kit
[kit contains 25 seal screens (key 231)
and 25 O‐rings (key 39)]
Standard and Extreme Temperature option
(fluorosilicone elastomers)
4* Terminal Box Kit, aluminum
Standard
Standard, Natural Gas approved
Extreme Temperature option (fluorosilicone
elastomers)
Extreme Temperature option (fluorosilicone
elastomers) Natural Gas Approved
5* I/P Converter Kit
Standard
For Extreme Temperature option
(fluorosilicone elastomers)
*Recommended spare parts
Kit
6*
Part Number
19B5402X012
19B5402X022
7*
19B5403X012
14B5072X182
19B5401X012
19B5401X032
19B5401X022
8*
19B5401X042
38B6041X152
9*
38B6041X132
Description
Spare Module Base Assembly Kit, Aluminum
[kit contains module base (key 2); drive screws, qty. 2,
(key 11); shield/label (key 19); hex socket cap screw, qty. 3,
(key 38); self tapping screw, qty. 2 (key 49); pipe plug, qty. 3
(key 61); retaining ring, qty. 3 (key 154); screen (key 236);
and flame arrestors, qty. 3 (key 243)]
Spare Housing Assembly Kit, aluminum
[kit contains housing (key 1); vent assembly (key 52);
seal (only included in Housing A kits) (key 288);
seal (key 237); O‐ring (key 34); O‐ring (only used
with integrally mounted regulator) (key 5)]
Housing A (used for GX actuator)
Standard (nitrile elastomers)
Extreme Temperature option
(fluorosilicone elastomers)
Housing B (used for all actuators except GX)
Standard (nitrile elastomers)
Extreme Temperature option
(fluorosilicone elastomers)
Spare I/P Shroud Kit
[kit contains shroud (key 169) and
hex socket cap screw, qty. 4 (key 23)]
Remote Mount Feedback Unit Kit (see figure 8‐5)
[remote housing assembly (key25); hex socket set
screw (key 58); 1/2 NPT pipe plug (key 62); wire retainer, qty 2
(key 131); terminal cover (key 255); o-ring (key 256); gasket
(Housing A only, used for GX actuator) (key 287); seal
(Housing A only, used for GX actuator) (key 288)
Housing A (used for GX actuator)
Housing B (used for all actuators except GX)
Parts
May 2013
Part Number
GE18654X012
GE48798X012
GE48798X022
GE48798X052
GE48798X062
GE29183X012
GE46670X012
GE40178X012
113