Driving Data (Multifunction Display) - Skoda SUPERB Owner's Manual

Skip to next track/station

Switch to previous track/station

Display the assistance systems menu

Press - display the telephone menu; accept/end the call; select contact

Hold - repeat last call; reject call
Operating the multifunction display
Turn - select data / set values
B
Press - display / confirm indication
Operating the MAXI DOT display
Hold - display main menu

Press - return to a previous level in the menu
Turn - move in the selected menu
B
Press - confirm selected menu item
Note
Depending on equipment not all functions may be available. The system indi-
cates this by means of a text message in the Infotainment display.

Driving data (Multifunction display)


Introduction
This chapter contains information on the following subjects:
Information overview
Warning when exceeding the set speed
Memory
The driving data display is only possible with the ignition switched on. After
the ignition is switched on, the function that was last selected before switch-
ing off the ignition is displayed.
If vehicles with MAXI DOTdisplay do not show the driving data after switching
on the ignition, select the menu item Driving data in the main menu and confirm
» page 44, MAXI DOT display.
The units and the display of some information can be set in Infotainment
» Owner´s Manual - Infotainment.
Note
The setting of the information display is stored in the active user account per-
sonalisation » page 46.
Information overview
Overview of driving data (depending on the vehicle equipment).
Range - drive distance in km which can be covered with the existing tank ca-
pacity and with the same driving style. If you drive more efficiently this value
can increase.
®
AdBlue range - drive distance in km which can be covered with the existing
®
AdBlue tank capacity and with the same driving style. If you drive more effi-
ciently this value can increase.
Average fuel consumption - is calculated continuously since the last time the
memory was deleted. After erasing the memory, no data will appear for the
first 100 m driven.
Current fuel consumption - when the vehicle is stationary or slowly moving,
the fuel consumption is displayed in l/h (--,- km/l appears on models for some
countries).
Oil temperature - if the temperature is lower than 50 °C or if there is a fault in
the system for checking the oil temperature, the  symbols are displayed.
Warning when the preset speed is exceeded - allows the setting of a speed
limit where, if exceeded, an acoustic warning signal and a warning message
appears on the display of the instrument cluster.
Traffic sign recognition - traffic signs display
tion.
43
Current speed - digital speedometer.
44
Average speed - is calculated continuously since the last time the memory
44
was deleted. After erasing the memory, no data will appear for the first 300 m
driven.
Driving route - distance driven since the last time the memory was deleted.
Driving time - driving time since the last time the memory was deleted.
Comfort consumers - information about the total consumption of the comfort
consumers in l/h and a list of three consumers (e.g. air conditioning etc.), which
have the largest share of fuel consumption.
» page 162, Traffic sign recogni-
43
Information system