Skoda SUPERB Owner's Manual page 86

Hide thumbs Also See for SUPERB:
Table of Contents

Advertisement

With repeated pressing of the button, the level is down-regulated until it
switches off . The level of the seat heating is indicated by the number of illu-
minated warning lights underneath / in the button.
The adjustment of the heating for the rear seat heating can be carried out in
Infotainment using the function surface  locked/unlocked
Manual - Infotainment. In the locked setting the heating power can only be ad-
justed down to turn off.
Front seats with seat heating and ventilation
Fig. 78 Display of the front seat heating (and ventilation) with warning
lights
Fig. 79 Infotainment display: Front seat heating and ventilation with
maximum heating / ventilation level switched on
Read and observe
and
The heating / ventilation level is indicated by the number of illuminated func-
tion surfaces in Infotainment.
on page 82 first.
Seat heating operation only
Press the  or  button on the air conditioning operating device. If the seat
heating was switched on before the ignition was switched off, then the seat
heating will switch on with maximum
»
Owner´s
Repeatedly pressing the  or  button on the air conditioning operating device
will turn down the heating output until it switches off.
The heat output can be set in the Infotainment.
Only use seat ventilation
Press the  or  button on the air conditioning operating device. If the seat
ventilation was switched on before the ignition was switched off, then the
seat ventilation will switch on with maximum output
Repeatedly pressing the  or  button on the air conditioning operating device
will turn down the ventilation output until it switches off.
The ventilation output can be set in Infotainment.
Operating the seat heating and ventilation simultaneously
Press the  or  button on the air conditioning operating device. If the seat
heating and ventilation were switched on before the ignition was switched
off, then proceed as follows.
In Infotainment, adjust the heating / ventilation output using the function
surfaces
and
A
tioning operating
The simultaneous adjustment of the heating / ventilation output with the  or
 button on the air conditioning operating device is not possible.
Note
In Infotainment, the seat heating or ventilation can be switched off via the re-
spective function surface
output» Fig. 78
» Fig.
79. The warning lights illuminate on the air condi-
B
device» Fig. 78
.
» Fig.
79.
Seats and head restraints
.
» Fig. 78
.
83

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents