Bulb arrangement in the headlights
Read and observe
and
The vehicle is equipped with headlights with halogen lamps or with a xenon
discharge lamp and an LED lighting element.
Bulb arrangement
» Fig. 261
Flashing
A
Low beam with halogen bulb or Xenon gas discharge bulb
B
Main beam
C
Replacing a bulb for low beam and main beam (halogen
headlights)
Fig. 262 Replacing the bulb for low beam and main beam
Read and observe
and
›
Remove the protective caps
B
›
Turn the holder with the bulb in the direction of arrow
›
Remove the holder with the bulb in the direction of arrow
Fig. 261
Left headlight
on page 214 first.
on page 214 first.
and
» Fig. 261
on page 215.
C
» Fig.
1
.
2
›
Remove the bulb from the holder in the direction of the arrow
›
Insert a new bulb into the connector so that the lug
snaps into the groove on the bulb.
›
Insert the connector with the new bulb into the headlight in the opposite di-
rection to the arrow
›
Turn the connector with the new bulb in the opposite direction to the arrow
until it stops.
1
›
Use the protective caps
Bulb for turn signal switch (halogen headlight)
Fig. 263 Changing the bulb for the turn signal light
Read and observe
›
Remove the protective cap
›
Remove the bulb holder with the bulb by jiggling it out in the direction of the
arrow
» Fig.
1
›
Hold the socket with the bulb at the position shown by the arrows.
›
Remove the faulty bulb from the holder in the direction of the arrow
›
Push a new bulb into the bulb holder up to the stop.
›
Slide the socket with the bulb with the fixing lug
into the recess on the reflector.
›
Fit the protective cap
262.
.
2
and
» Fig. 261
on page 215.
B
C
and
on page 214 first.
» Fig. 261
on page 215.
A
263.
» Fig. 261
on page 215.
A
.
3
on the connector
A
.
2
upwards so that it fits
B
215
Fuses and light bulbs