B R
SUSPENSION
2 -13
D I S A S S E M B L Y AND A S S E M B L Y ( C o n t i n u e d )
UPPER 1ALL STUD
DISASSEMBLY
(1) Remove the upper suspension arm.
(2) Position special tools on upper suspension arm
and press ball stud out of arm (Fig. 9).
SPECIAL TOOL
C-4212F
SPECIAL TOOL
6289-3
J9402-36
Fig. 9 Upper Bail Stud
Removal
ASSEMBLY
(1) Press ball stud into upper suspension arm with
special tools (Fig. 10).
(2) Install the upper suspension arm.
C L E A N I N G A N D I N S P E C T I O N
WHEEL BEAR1NSS
NOTE: Bearing and races must be replaced as a
set if worn or damaged.
(1) Thoroughly clean the interior of hub/rotor.
(2) Clean the bearings with solvent and towel dry.
(3) After cleaning, apply engine oil to each bear
ing.
(4) Rotate each bearing slowly while applying
downward force. Examine the rollers for pitting and
roughness, replace bearing i f worn or defective.
(5) Remove the engine oil from each bearing. Pack
each bearing with multi-purpose NLGI, grade 2, EP-
type lubricant (or an equivalent lubricant).
NOTE: Ensure that lubricant is forced into all the
cavities between the bearing cage and rollers.
SPECIAL TOOL
C4212F
J9402-35
Fig. 10 Upper Ball Stud Installation
S P E C I F I C A T I O N S
IFS SUSPENSION (WAX COAT FRAME)
DESCRIPTION
TORQUE
Shock Absorber
Upper Nut. . . . . .
.
. .41 N-m (30 ft. lbs.)
Lower Bolt.
.135 N-m (100 ft. lbs.)
Lower Suspension Arm
Frame Nuts
149 N-m (110 ft. lbs.)
Ball Stud Nut
75 N-m (55 ft. lbs.)
Upper Suspension Arm
Pivot Bar Nuts
. . . . . . . .203 N-m (150 ft. lbs.)
Ball Stud Nut . . . . . . .
75 N-m (55 ft. lbs.)
Stabilizer Bar
• Clamp Bolt
. . .47 N-m (35 ft. lbs.)
Link Nuts
34 N-m (25 ft. lbs.)
IFS SUSPENSION (E-C0AT FRAME)
DESCRIPTION
TORQUE
Shock Absorber
Upper Nut
41 N-m (30 ft. lbs.)
Lower Bolt.
135 N-m (100 ft. lbs.)
Lower Suspension Arm
Frame Nuts
.271 N-m (200 ft. lbs.)
Ball Stud Nut
75 N-m (55 ft. lbs.)
Upper Suspension Arm
Pivot Bar Nuts
271 N-m (200 ft. lbs.)
Ball Stud Nut
75 N-m (55 ft. lbs.)
Stabilizer Bar
Clamp Bolt
. .61 N-m (45 ft. lbs.)
Link Nuts
34 N-m (25 ft. lbs.)