Dodge ram truck 3500 1996 Service Manual page 451

B R
AUDIO SYSTEMS 8F - 7
R E M O V A L AND I N S T A L L A T I O N ( C o n t i n u e d )
(4) Carefully pry the bezel away from the instru- ^ | | \\
ment panel to disengage the retaining clips (Fig. 4).
J948F-5
J948E-46
Fig. 4 duster Bezel Remove/install
(5) Unplug the connector from cigar lighter (Fig.
Fig. 6 Radio Mounting
5).
, ELECTRICAL
CONNECTOR
CLIPS
J948E-10
Fig, 5 Cigar Lighter Remove/Install
(6) Unplug the connector from the auxiliary power
outlet.
(7) Remove the 'two radio mounting screws from
the front of the radio (Fig. 6).
(8) Pull the radio out from the instrument panel
far enough to disconnect the wiring and the antenna
coaxial cable (Fig. 7).
(9) Remove the screw from the radio ground strap
and remove the radio.
(10) Reverse the removal procedures to install.
SPEAKERS
FRONT DOOR
(1) Disconnect and isolate the battery negative
cable.
A N T E N N A
J948F-6
Fig. 7 Radio Connectors
(2) Remove the two screws in the door pull cup
and remove the cup (Fig. 8).
REMOVE 2 SCREWS
J948S-2
Fig. 8 Door Puil Cup Remove/install
(3) I f equipped, remove the manual window regu­
lator crank handle with a removal tool (Fig. 9).
(4) I f equipped, remove the power window and lock
switches by reaching through the door pull cup open­
ing and depressing the switch bezel rear retaining
tab (Fig.
10).