Dodge ram truck 3500 1996 Service Manual page 524

8R - 4 POWER SEAT SYSTEMS
BR
R E M O V A L AND INSTALLATION {Continued)
(5) Unplug the power seat wire harness connector
located under the seat.
(6) Remove the driver's seat assembly from the
vehicle.
(7) Remove the four screws attaching the seat
adjuster to the seat cushion frame (Fig. 6). -
(8) Reverse the removal procedures to install.
Tighten the seat mounting hardware as follows:
• Seat cushion frame to adjuster bolts - 25 N-m
(18 ft. lbs.)
• Seat adjuster to floor pan bolts - 29 N-m (20. ft.
lbs.)
• Seat adjuster to floor pan nut - 41 N-m (80 ft
lbs.)
• Center seat section bolts - 25 N-m (18 ft. lbs.).
Fig. 6 Power Seat Adjuster Remove