Adding A Host To The Host List - HP StorageWorks M2402 User Manual

Serial/Telnet User Interface

Adding a Host to the Host List

To add a host to the Host List, select Add (A).
If the host is an FCP host, the Host Name, Host ID, port WWN, and Node WWN
for FCP host must be entered. (WWN values are hexidecimal.)
Figure 89
of a FCP host.
Figure 89: Adding a Host to the Host List - FCP host
If the host is a SCSI host, the host name and the initiator ID must be entered.
Figure 90
of a of a SCSI host.
Figure 90: Adding a Host to the Host List - SCSI host
154
is an example of the screen display when adding a host to the Host List
is an example of the screen display when a host is added to the Host List
Network Storage Router M2402 User Guide