Serial/Telnet User Interface - HP StorageWorks M2402 User Manual

Serial/Telnet User Interface

The Serial/Telnet User Interface (UI) is used to configure and manage the HP
StorageWorks Network Storage Router M2402. This chapter describes the
configuration menus and option tasks available in the Serial/Telnet UI.
Note:
reboots.
During the start up process of the router, the Serial/Telnet UI displays initial
power-up messages. After the power-up process is completed, the main menu of
the UI is displayed. Within the router main menu, several configuration menus and
tasks are listed. All configuration and management tasks are performed from these
menus.
This chapter is organized using the same structure as the router main menu and its
associated sub-menus. The sections are:
Network Storage Router M2402 User Guide
Unless otherwise indicated, configuration changes take effect when the router
Telnet UI Access, page 119
Serial UI Access, page 120
Power up Messages, page 120
Serial/Telnet UI Main
Configuration Menu, page 122
Baud Rate Configuration, page 124
Ethernet Configuration, page 125
World Wide Node Name
Modules Configuration, page 129
— Configuring Fibre Channel modules
— Configuring SCSI modules
Menu, page 121
Configuration, page 128
5
117