Front Panel Annunciators; Immediate Action Keys - Agilent Technologies 66311A User Manual

Front Panel Annunciators

The output is operating in constant voltage mode.
CV
CC The output is operating in constant current mode.
The output is unregulated.
Unr
Dis The output is OFF. Press the Output On/Off key to turn the output on.
OCP The over-current protection state is ON. Press the OCP key to turn over-current
protection off.
Prot Indicates that the output has been disabled by one of the protection features.
Press the Prot Clear key to clear the protection condition.
Cal Calibration mode is ON. Scroll to the Cal Off command and press the Enter key
to exit the calibration mode.
The Shift key has been pressed.
Shift
Rmt The selected Remote programming interface (either HP-IB or RS-232) is active.
Press the Local key to return the unit to front panel control.
Addr The interface is addressed to talk or listen.
Err There is an error in the SCPI error queue. Press the Error key to view the error
code.
SRQ The interface is requesting service.

Immediate Action Keys

Output
A toggle switch that turns the output of the dc source on or off.
On/Off
Activates front panel control when the unit is in remote mode (unless a Lockout
Local
command is in effect).
Resets the protection circuit and allows the unit to return to its last programmed
Shift Prot Clr
state.
Shift
OCP
A toggle switch that enables or disables overcurrent protection.
Quick Reference - 1
5