Siemens SINAUT MD741-1 System Manual page 48

4 Local interface
The external domain name server (DNS) used can be a server of the network
operator, a server on the Internet, or a server in a private external network.
Figure 4-6
Selected nameserver
Select which domain name server (DNS) the SINAUT MD741-1 should query.
Provider-defined
When a connection is established to EGPRS or GPRS the network operator
automatically communicates one or more DNS addresses. These are then used.
User-defined
As the user you select your preferred DNS. The DNSes can be connected to the
Internet, or it can be a private DNS in your network.
User name server
If you have selected the option User-defined then enter the IP address of the
selected DNS as the Server IP Address.
New can be used to add additional DNSes.
Factory settings
The factory settings for the SINAUT MD741-1 are as follows:
Use name server
User defined nameserver
for new entry
48
Local Network > Basic Settings > DNS
Provider Defined
-
0.0.0.0
C79000-G8976-C236-05
SINAUT MD741-1