Table of Contents
Advertisement
7 VPN connection
IPsec VPN – Edit Firewall Rules
Figure 7-9
Connections settings > Edit > Firewall rules for VPN tunnel > Edit
Function
The IPsec VPN connection is viewed as fundamentally secure. Thus data traffic
over this connection is not limited by default. It is possible, however, to create
firewall rules for the VPN connection
To set up firewall rules for the VPN connection, proceed in the same way as for
setting up the packet filter function of the general firewall (see Chapter 6.1).
However, the rules defined here apply only to the specific VPN connection.
Factory settings
The factory settings for the SINAUT MD741-1 are as follows:
Firewall rules for VPN tunnel
100
IPsec-VPN > Connections > VPN connections in standard mode >
No limitations
C79000-G8976-C236-05
SINAUT MD741-1
Advertisement
Table of Contents
