Additional Internal Routes - Siemens SINAUT MD741-1 System Manual

4 Local interface
4.6

Additional Internal Routes

If the local network is subdivided into subnetworks, you can define additional
routes. See also the Glossary.
Figure 4-9
To define an additional route to a subnetwork, click on New.
Specify the following:
the IP address of the subnetwork (network), and also
●
the IP address of the gateway via which the subnet is connected.
●
You can define any desired number of internal routes.
To delete an internal route, click on Delete.
Factory settings
The factory settings for the SINAUT MD741-1 are as follows:
Additional internal routes
Default for new routes:
Network:
Gateway:
52
Local Network > Advanced Settings > Additional onternal rotes
-
No
192.168.2.0/24
192.168.0.254
C79000-G8976-C236-05
SINAUT MD741-1