Table of Contents
Advertisement
12 Applied Standards and Approvals
FCC Part 15.21
Modifications not expressly approved by this company could void the user's
authority to operate the equipment.
Installation by qualified personnel only
You may only use the SINAUT MD741-1 with an antenna of the SINAUT MD741-1
accessory program.
The installation of the SINAUT MD741-1 and the antenna as well as servicing is to
be performed by qualified technical personnel only. When servicing the antenna, or
working at distances closer than those listed below, ensure the transmitter has
been disabled.
Contains FCC ID: QIRMC75 (GSM Module)
This device contains GSM, GPRS Class12 and EGPRS Class 10 functions in the
900 and 1800 MHz Band which are not operational in U.S. Territories.
This device is to be used only for mobile and fixed applications. The antenna(s)
used for this transmitter must be installed to provide a separation distance of at
least 20cm from all persons and must not be co-located or operating in conjunction
with any other antenna or transmitter.
Users and installers must be provided with antenna installation instructions and
transmitter operating conditions for satisfying RF exposure compliance. Antennas
used for this OEM module must not exceed 8.4dBi gain (GSM 1900) and 2.9dBi
(GSM 850) for mobile and fixed operating configurations. This device is approved
as a module to be installed in other devices.
136
SINAUT MD741-1
C79000-G8976-C236-05
Advertisement
Table of Contents
