Advertisement
Quick Links
s
CM1N9270en_10
2017-10-16
Desigo™ PX
BACnet router for
• BACnet/IP
• BACnet/LonTalk
• BACnet MS/TP
Routing between BACnet/IP , BACnet/LonTalk (PXG3.L only),
•
and BACnet MS/TP
Supports BACnet/IPv4 and BACnet/IPv6
•
ANSI/ASHRAE 135-2012 Annex J compliant
•
ISO 16484-5 compliant
•
BTL label (BACnet communications passed the BTL test)
•
BBMD support (BACnet Broadcast Management Device)
•
Third-party device support
•
Configuration via Xworks Plus or Web browser (via IPv4)
•
Web browser access to network statistics
•
Firmware update via Ethernet and USB Device
•
LED indication for Ethernet link and activity
•
LED indication for BACnet/LonTalk and BACnet MS/TP (diagnostics)
•
2-port Ethernet switch for low-cost cabling (10/100 baseT)
•
BACnet MS/TP (RS-485) baud rates: 9600, 19200, 38400, 76800, 115200
•
Plug-in screw terminal blocks for supply, L
•
RJ45 plug for PXM20 (L
•
Operating voltage: AC 24 V or DC 24 V
•
DIN rail mounting
•
BACnet MS/TP Slave Proxy
•
SNMP (v2), MIB-2
•
BACnet NAT
•
ON
W
)
ON
ORKS
9
PXG3.L
PXG3.M
W
, and MS/TP
ORKS
Building Technologies
270
Advertisement
Related Manuals for Siemens PXG3 Series
Summary of Contents for Siemens PXG3 Series
- Page 1 Desigo™ PX PXG3.L BACnet router for • BACnet/IP PXG3.M • BACnet/LonTalk • BACnet MS/TP Routing between BACnet/IP , BACnet/LonTalk (PXG3.L only), • and BACnet MS/TP Supports BACnet/IPv4 and BACnet/IPv6 • ANSI/ASHRAE 135-2012 Annex J compliant • ISO 16484-5 compliant • BTL label (BACnet communications passed the BTL test) •...
-
Page 2: Router Functions
When routing between BACnet/IP and BACnet/IP on one IP network, the BACnet router address must be the same on both BACnet networks. The difference is that different BACnet UDP ports are used on the BACnet network. 2 / 10 Siemens PXG3... BACnet router for Ethernet - LONWORKS - MS/TP CM1N9270en_10... -
Page 3: Ethernet Ports
Service button for identification on network (Ethernet, L ORKS terminal block (PXG3.L only) ORKS MS/TP terminal block Slider for mounting on DIN rail 3 / 10 Siemens PXG3... BACnet router for Ethernet - LONWORKS - MS/TP CM1N9270en_10 Building Technologies 2017-10-16... - Page 4 RUN LED flashes, then release. 5. Wait for device to fully start up unconfigured (RUN LED on, SVC LED flashes). Any device passwords and other settings are lost. 4 / 10 Siemens PXG3... BACnet router for Ethernet - LONWORKS - MS/TP CM1N9270en_10 Building Technologies...
-
Page 5: Installation
European Directive 2012/19/EU (WEEE) and may not be disposed of as domestic waste. Dispose of the devices via the proper channels. Observe all local and applicable laws. 5 / 10 Siemens PXG3... BACnet router for Ethernet - LONWORKS - MS/TP CM1N9270en_10 Building Technologies... - Page 6 2 x 0.6 mm dia. to 1.5 mm Screwdriver Slot screws Screwdriver, size 1 with shaft dia. ≤ 4.5 mm Max. tightening torque 0.6 Nm 6 / 10 Siemens PXG3... BACnet router for Ethernet - LONWORKS - MS/TP CM1N9270en_10 Building Technologies 2017-10-16...
- Page 7 RAL 7035 (light-gray) Dimensions Housing as per DIN 43880, see dimensions Weight Without/with packaging 286 g / 332 g *) The documents can be downloaded at http://siemens.com/bt/download. 7 / 10 Siemens PXG3... BACnet router for Ethernet - LONWORKS - MS/TP CM1N9270en_10...
- Page 8 System neutral Technical ground ORKS Name Description assignment ORKS ORKS MSTP pin assignment Name Description Data + – – Data – Reference wire 8 / 10 Siemens PXG3... BACnet router for Ethernet - LONWORKS - MS/TP CM1N9270en_10 Building Technologies 2017-10-16...
- Page 9 Dimensions All dimensions in mm 9 / 10 Siemens PXG3... BACnet router for Ethernet - LONWORKS - MS/TP CM1N9270en_10 Building Technologies 2017-10-16...
- Page 10 Building Technologies Division International Headquarters Gubelstrasse 22 6301 Zug Switzerland Tel. +41 41-724 24 24 © Siemens Switzerland Ltd 2012 www.siemens.com/buildingtechnologies Delivery and technical specifications subject to change 10 / 10 Siemens PXG3... BACnet router for Ethernet - LONWORKS - MS/TP...