Siemens SINAUT MD741-1 System Manual page 92

7 VPN connection
Netmask of the remote network
Enter the subnet mask of the remote network in the box. The remote network can
also be a single computer.
Enable 1:1 NAT for the remote network
Select one of the following two options from the drop-down list:
Yes:
●
No:
●
If you have enabled 1:1 NAT, the address of the frames sent from the local network
to a remote network is changed. See the input box below.
Address for 1:1 NAT to the remote network
In the input box, enter a network address for frames that are sent to a remote
network.
Local net address
Enter the IP address of the local network (for example 123.123.123.123) in the
box. The local network can also be a single computer.
Local subnet mask
Enter the subnet mask of the local network (for example 255.255.255.0) in the box.
The local network can also be a single computer.
Enable 1:1 NAT for the local network
Select one of the following two options from the drop-down list:
Yes:
●
No:
●
If you have enabled 1:1 NAT, the address of the frames sent from a remote
network to a local network is changed. See the input box below.
Address for local 1:1 NAT in local network
In the input box, enter a network address for frames that are received from the
remote network.
92
1:1 NAT is enabled for the remote network.
1:1 NAT is disabled.
1:1 NAT is enabled for the local network.
1:1 NAT is disabled.
SINAUT MD741-1
C79000-G8976-C236-05