Table of Contents
Advertisement
5 External interface
User name / Password
Enter here the username and the password that authorise you to use the DynDNS
service. Your DynDNS provider will give you this information.
Host name of the DynDNS server
Here enter the hostname that you have agreed with your DynDNS provider for the
SINAUT MD741-1, e.g. myMD741.dyndns.org.
Factory settings
The factory settings for the SINAUT MD741-1 are as follows:
Log this device on at a DynDNS server
Username
Password
Host name
5.6
SRS – Siemens Remote Service
Note
Using the services provided by the "SIMATIC Remote Support Services", remote
access to machines and plants is available.
To use the services, additional service agreements are necessary and certain
constraints must be kept to. If you are interested in the Siemens Remote Service,
speak to your local Siemens contact.
If the Siemens Remote Service is activated, the SINAUT MD741-1 transfers its
external IP address assigned by the EDGE/GPRS service to a selectable
destination server. This transfer is made using the secure HTTPS protocol.
The procedure is comparable with the DynDNS service and requires suitable
access to the server.
66
No (switched off)
guest
guest
myname.dyndns.org
C79000-G8976-C236-05
SINAUT MD741-1
Advertisement
Table of Contents
