Table of Contents
Advertisement
10 Additional functions
CommandCode
Command to send an SMS message from the local network This value of 105 is
fixed and must not be modified.
Seq-Num
The sequence number is used to assign several requests at the same time The
function is not currently supported.
The sequence number consists of 2 numeric characters from 01 to 99
Call number
Call number of the SMS recipient with a maximum of 40 characters. International
numbers (+49) are permitted.
Message
SMS text with a maximum of 160 characters
The following forbidden characters must not occur in the SMS text:
# Separator for the first command level
;
Separator for the second command level
:
Identifies the end of the message
Enable sending SMS from local network
Select Yes to be able to send SMS messages from the local network.
Select No if you do not want to send SMS messages from the local network.
User name
User name that must be included in the frame before the text is sent using SMS
(see above: "Frame format"). Maximum of 10 characters.
Password
Password that must be included in the frame before the text is sent using SMS
(see above: "Frame format"). Maximum of 10 characters.
124
SINAUT MD741-1
C79000-G8976-C236-05
Advertisement
Table of Contents
