9 Status, log and diagnosis
Password
Specifies the password for logging in to the FTP server.
Factory settings
The factory settings for the SINAUT MD741-1 are as follows:
Enable remote logging (FTP upload)
Time
FTP Server
Username
Password
9.3
Snapshot
This function is used for support purposes.
The service snapshot downloads important log files and current device settings that
could be important for fault diagnosis and saves them in a file.
If you contact our Hotline in the event of a problem with the SINAUT MD741-1, in
many cases they will ask you for the snapshot file.
Note
This file contains the access parameters for EGPRS and GPRS and the addresses
of the remote station. It does not contain the username and password for access to
the SINAUT MD741-1.
118
No (switched off)
00:00
NONE
guest
guest
C79000-G8976-C236-05
SINAUT MD741-1