Table of Contents
Advertisement
2 Setup
2.9
Top rail mounting
The SINAUT MD741-1 is suitable for top-hat rail mounting on DIN EN 50022 rails.
A corresponding bracket can be found at the rear of the device.
Figure 2-4
Installation
1. Fit the upper part of the locking mechanism of the device on to the DIN rail.
2. Press the device down against the DIN rail until the spring catch locks in
place.
Uninstalling
1. Using a screwdriver, pull down the spring catch on the rear of the device.
2. Remove the device from the DIN rail
24
Top rail mounting
SINAUT MD741-1
C79000-G8976-C236-05
Advertisement
Table of Contents
