Table of Contents
Advertisement
3 Configuration
English
The SINAUT MD741-1 uses the English language, irrespective of the Web browser
settings.
Click the GO and refresh your Web browser to change the language.
3.6
Configuration procedure
The procedure for configuration is as follows:
Carrying out configuration
1. Use the menu to call up the desired settings area
2. Make the desired entries on the page concerned or use Reset to delete the
current entry which has not been saved.
3. Use Save to confirm the entries so that they are accepted by the device.
Figure 3-6
Note
Depending on how you configure the SINAUT MD741-1, you may then have to
adapt the network interface of the locally connected computer or network
accordingly. When entering IP addresses, always enter the IP address component
numbers without leading zeros, e.g.: 192.168.0.8.
Invalid entries
The SINAUT MD741-1 checks your entries. Obvious errors are detected during
saving and the input box in question is marked.
36
Configuration
SINAUT MD741-1
C79000-G8976-C236-05
Advertisement
Table of Contents
