Table of Contents
Advertisement
7 VPN connection
Enable dead peer detection
Note
Sending DPD requests increases the amount of data sent and received via EGPRS
or GPRS. This can lead to increased costs,
Select one of the two options from the drop-down list:
Yes:
Dead peer detection is enabled. Regardless of whether user data is being
transmitted, the SINAUT MD741-1 recognizes loss of the connection. In
this case, the device waits for the connection to be re-established by the
remote stations.
No:
Dead peer detection is disabled.
If you select "Yes", the following three input boxes appear:
Delay after DPD query (seconds)
Enter a period in seconds in the input box after which DPD queries are sent. These
queries test whether or not the remote station is still available.
Timeout after DPD query (seconds)
Enter a length of time in seconds in the input box. If there is no response to the
DPD queries, the connection to the remote station is declared to be invalid after
this time has elapsed.
DPD: maximum number of unsuccessful attempts
In the input box, enter the number of permitted failures before the IPsec connection
is considered to be interrupted.
Factory settings
The factory settings for the SINAUT MD741-1 are as follows:
Name
Enabled
Authentication method
Remote ID
Local ID
96
NewConnection
No (switched off)
CA certificate
NONE
NONE
C79000-G8976-C236-05
SINAUT MD741-1
Advertisement
Table of Contents
