Table of Contents
Advertisement
live
Shutting down the System
1. In the live screen menu, select <Shutdown>.
2. The "Shutdown" confirmation pop-up window will appear.
3. Click on <oK>.
The system will shut down.
Only the user with the "shutdown" permission can shut down
`
M
the system.
For the permission management, refer to "User > Setting
`
Permissions". (Page 29)
Login
To use the NVR menu, you are required to login as a user that is authorized to access the applicable menu.
1. Right click with your mouse button on the live mode screen.
You will see the context menu on the screen as shown.
2. Select <Login>.
The login dialog appears.
The initial administrator ID is set to "admin" and you will need to
`
J
configure the password in the installation wizard.
Please change your password every three months to safely protect
`
personal information and to prevent the damage of the information
theft.
Please, take note that it's a user's responsibility for the security and any other problems caused by mismanaging a password.
For the restricted permission, refer to "User > Setting Permissions". (Page 29)
`
M
16_ live
LIve Screen confIguratIon
Icons on the Live Screen
You can check the status or operation of the NVR with the icons on the live screen.
FULL
NO
F
FULL
NO
CAM 01
F
Name
FULL
Current Date, Time
a
Displays the current time and date.
FULL
NO
Login Information
When you are logged in, the "LOG ON" icon will be displayed.
b
FULL
NO
RAID
It is displayed when there is ongoing backup in the live condition.
FULL
NO
RAID
If access to the recording canceling menu is restricted, then it is only displayed when
there is ongoing manual recording.
Only a user with the right to cancel recording can do so.
`
FULL
NO
RAID
RAID
Screen Mode
c
It is displayed when the magnifying function is in operation.
This icon is displayed when you press the Freeze button.
It is displayed when all the channels are switched at the set time interval.
It is displayed when there is a problem with the fan.
FULL
It is displayed when the recording data cannot be received properly due to a device
problem.
FULL
NO
System
Displayed if the HDD is full and the NVR has an insufficient space to record.
d
Operation
FULL
NO
RAID
Displayed if no HDD is installed or the existing HDD should be replaced.
FULL
NO
RAID
Displayed if the HDD needs a technical examination.
FULL
NO
RAID
RAID
FULL
2016-01-01 00 : 00 : 01
SCSI
SCSI
Description
NO
RAID
RAID
SCSI
RAID
RAID
SCSI
RAID
SCSI
RAID
SCSI
SCSI
NO
RAID
RAID
SCSI
RAID
RAID
SCSI
RAID
SCSI
RAID
SCSI
SCSI
NO
RAID
RAID
SCSI
Hide quick links:
Advertisement
Table of Contents
