Samsung XRN-1610S User Manual page 33

to manually search for and register a network camera
1. In the <Cam Registration> menu, click on the <manual> button.
2. The manual search window will appear.
3. Select a channel and protocol used to connect to a camera.
The input items may differ depending on the selected protocol.
• SAMSUNG : Comply with the internal network protocols adopted by Hanwha Techwin.
• ONVIF : Means the camera supports ONVIF protocols. When connecting a camera that its name cannot be
found from the list, select <OnVIF>.
Time difference between the ONVIF camera and NVR exceeds more than 2 minutes, the camera cannot be connected. In this
`
M
case, synchronize the ONVIF camera's time to the NVR or set times of both camera and NVR to a same NTP server (if in the
same time zone), or make the NVR an NTP server.
• RTSP : Comply with RFC 2326, one of "Real Time Streaming Protocol (RTSP)" for real-time streaming.
4. If you select the <SAmSung> protocol, check options as necessary.
• Model : Select a camera model.
- Samsung Network Camera/Encoder : Means the camera/encoder supports Hanwha Techwin's SUNAPI,
SVNP protocol. When connecting a camera that does not appear in the camera list, select Samsung
Netowrk Camera/Encoder.
However, you must select the correct model name of the camera, if it's in the list. Some of obsolete camera models may not be
`
supported.
The below models are discontinued. If you register them with ONVIF, some camera functions will be restricted or cause errors.
`
It is recommended you register the Samsung protocol.
- SNB-2000, SNB-3000, SNC-B2315, SNC-B2331, SNC-B2335, SNC-B5368, SNC-B5395, SNC-B5399, SNC-570,
SNC-1300, SND-460V, SND-560, SND-3080, SND-3080C, SND-3080CF, SND-3080F, SND-3081, SNP-3301, SNP-3301H,
SNP-3350, SNP-3370, SNP-3370TH, SNP-3750, SNV-3080, SNP-3430
• Address type : Select an address type of the camera.
Address type can be different dependingon connected product model.
`
- Static(IPv4)/Static(IPv6) : Used to provide the IP address of the camera manually.
- iPOLiS DDNS : This is available only if the camera is registered with the iPOLiS DDNS(www.samsungipolis.
com) server. Provide the registered domain for DDNS ID.
Ex) http://www.samsungipolis.com/snb5000 ; provide "snb5000" for iPOLiS DDNS
`
- URL : Used for URL address input.
Refer to the user manual of the connected camera and check the DDNS specification that is supported by the camera.
`
M
• IP Address : Provide the IP address of the camera.
• Device Port : Provide the device port of the camera.
• HTTP Port : Provide the HTTP port of the camera.
• ID : Provide the ID of the camera that you want to register.
• Password : Enter the password of the camera to be registered.
5. Select <OnVIF> or <RtSp> for the protocol and enter your input for each field appears.
• ONVIF Address / RTSP URL : Enter the camera's RTSP access address that supports ONVIF or RTSP.
For more information about the RTSP address, refer to the manual of each applicable network camera.
• ID : Enter the ID for accessing via ONVIF/RTSP protocol.
• Password : Enter the password for accessing via ONVIF/RTSP protocol.
• Mode : If <more Detail> button clicked, setup window will appear. Select a mode that is supported by the
network camera in RTSP connection mode.
- TCP : The connection type with the network camera will switch to "RTP over TCP".
- UDP : The connection type with the network camera will switch to "RTP over UDP".
- HTTP : The connection type with the network camera will switch to "RTP over TCP (HTTP)".
- HTTPS : The connection type with the network camera will switch to "RTP over TCP (HTTPS)".
If you want to check the error details of camera registration
If you failed to register a camera, the reason for the failure will be displayed.
• Connection failed due to unknown error. : This message appears if the camera has failed to be registered
due to unknown connection status.
• Due to the camera account locking, access has failed. : When you enter a wrong ID/password 5 times to
login to the camera account, this message is displayed.
Try to log in again after 30 seconds. If the same message appears, you may need to check whether someone
has tried to access your camera account from the outside.
• Connected successfully. : This message appears if the camera is connected successfully.
• Incorrect model information. provide the correct model information. : This message appears if the
model information provided for registering the camera is incorrect.
• Authentication has failed : This message appears if the ID or password provided for registering the camera
is incorrect.
• Connection has failed due to excessive concurrent users. : This message appears if the concurrent user
count exceeds the upper limit.
• Connection has failed due to incorrect http port information. : This message appears if the HTTP port
number of the camera is invalid.
• Connection has failed. unknown connection status. : This message appears if the camera has failed to
be connected due to a unknown error.
• user model modification : When registering a new camera, it is named according to the device's default if
user set the model to <Samsung network Camera/encoder>. In case if automatic registration fails, user
can change the model name of camera to be registered.
to edit camera profile
When a camera is added for the first time, it is added as the default profile of H.264, H.265 and MJPEG in
order temporarily.
To change its profile, refer to "Setting the network camera's recording profile" (Page 42) or "Live Setting"
(Page 36).
In case of NVR, if you set 3 different profiles for live, recording and network profile, one camera will produce video streams
`
M
accordingly, having different stream formats. Especially, note that the live profile may vary depending on the used screen split mode.
For cameras, if applied with one profile only, the produced frame rate is fixed as the profile specifies; if applied with multiple
`
profiles, produced video stream's frame rate is not guaranteed. For example, if applied with 2 profiles of 30fps, the camera
may transmit streams at 20fps.
English _33