Samsung XRN-1610S User Manual page 49

Recipient Setting
You can create a group and add users to it or you can delete users and change a group.
• Click on < > to add a group.
Select a group name and the privilege.
• Select a recipient group to receive emails.
If a group is added, it will appear in the group list.
• Click on < > to add a recipient.
Select a group and enter names and email addresses.
If a group is created, you can add a recipient.
For inputting the recipient name and email address, refer to "Using Virtual Keyboard". (Page 28)
`
Snmp
Using the SNMP protocol, the system or network administrator can monitor the network devices remotely as
well as the operating environment.
• Enable SNMP v1 : SNMP version 1 is used.
• Enable SNMP v2 : SNMP version 2 is used.
- Read Community : Enter the name of read-only community to access the SNMP information. By default it is
set to <public>.
- Write Community : Enter the name of write-only community to access the SNMP information. By default, it
is set to <private>.
• Enable SNMP v3 : SNMP version 3 is used.
- Password : Set the initial user password for SNMP version 3.
• Enable SNMP Traps : SNMP trap is used to send important events and conditions to the Admin System.
- Trap Manager : Enter the IP address to which messages will be sent.
SNMP v3 can be set only if the security connection method is set to HTTPS mode.
`
J
Refer to "SSL" for more details. (Page 47)
DhCp Server
You can set the internal DHCP server and assign an IP address to the network camera.
network Setting
• Network 1/2 : Select <Setup>, and you can set the IP range operated by the server and time.
In PnP mode,XRN-1610S only Network 1 supports DHCP Server.
to set the DhCp server
1. On the DHCP Server Setup window, click <Setup>.
2. Select <Run> in the <Status> field.
3. Enter the starting IP and end IP in the <Ip Range> field.
4. Fill in the <Ip Lease time> field.
5. Click <OK>.
The IP range entered is set as the DHCP server address of the network.
Check Ip
You can check the IP Address and Mac currently used through the DHCP server, and the connected network
port.
• Network : Select the network port to check the information on IP and others.
For a Standby device, you can only use limited functions in the <System Environment>, <Device> and <Network>
`
M
English _49