Poe Status(Xrn-1610S); Layout - Samsung XRN-1610S User Manual

live

poe StatuS(xrn-1610S)

In the live screen, you can see the PoE status of each port.
1. Select the <poe Status>.
PoE status view window is displayed.
• Consumption(W) : Displays the power consumption in PoE.
- 0 : No device is connected to the port or a device is using
its own power supply.
- – : Trouble in the port (More detailed trouble information can
be displayed in additional information.)
Overall PoE power specifications for XRN-1610S(16 ports) is 220W, If
`
M
a single port exceeds 36W, or the power to all ports exceeds the overall PoE power specifications, the power to ports will be shut off
sequentially.
• PoE : Turns on/off the power supply to the camera.
If checked, it means the power supply is On; if not checked, it means it is Off.
• Additional information : If there is a problem in the power supply, it is explained here.
Power supply problems include excessive power (class 1 to 4) and voltage errors.
• Total PoE power consumption : Display the sum of power consumption for all the ports.
2. Press <return> to move to the previous screen.
noise level according to poe power consumption
Model Noise Level [dB]
XRN-1610S
22_ live
PoE Power
50 196W
48 154W
47 138W

Layout

In the live screen, you can set the layout for each channel.
Setting up the Live Layout
This section outlines how to select a series of channels based on their purpose/accessibility and monitor them
in a single layout.
Example) Layout "Lobby" - Lobby camera 1, Lobby camera 2, Front entrance camera 2
Layout "VIP" - Directors' meeting room 1, Directors' meeting room 2, Directors' lounge 1, Corridor camera on
the 7th floor
a
To create a new layout, follow these steps:
a Open the channel layout setup menu.
b Click <new>.
c Enter a name for the selected channels (e.g., ELEVATOR).
d Select the channels that you want to add to the layout (e.g., 2, 7, 10, 15).
e Choose a split mode to apply (e.g., 4-way split).
f Click <oK>.
g Choose a layout to view it on the screen (e.g., change to ELEVATOR).
1. Select the <
>.
The layout setting screen will appear.
• New : You can set the new layout.
• Rename : Rename Layout. You can make changes to the selected layout.
When the layout is changed, the channel order is initialized.
• Delete : You can delete the selected layout.
• Channel Table : You can select channels in the table to be registered in, or removed from the layout.
• Channel List : You can select channels in the list to be registered in, or removed from the layout.
2. Press the <new> button and enter the name of layout to add.
3. In the <ch. table> or <channel List>, click and select the channel to be displayed on the layout screen.
4. Click on <oK> to save the selected layout.
The layout for each user is saved separately.
`
M
c
b
g
f e d