Samsung XRN-1610S User Manual page 70

setup viewer
Alarm Out Schedule
You can schedule the alarm output according to the day of the
week and the time.
The default setting is Event Sync, which activates the alarm only
if an event occurs.
network
For more information, refer to "network Configuration". (Page 45)
Interface
A remote user can access the NVR via the network to check the current mode and the IP address.
network
Specify the network connection path.
Port
You can configure the protocol related settings.
70_ setup viewer
ddnS
network 1/2
You can check the DDNS settings.
IP Filtering
You can prepare the list of IP address to allow or block
accesses to a specific IP address.
SSL
You can select a security connection system or install public
certificates.
While using HTTPS, if you want to switch to HTTP, then abnormal
`
M
operation can take place as the browser contains the setting
values. You need to change the URL to HTTP and reconnect or
initialize the cookie setting of the browser.