Samsung XRN-1610S User Manual page 28

menu setup
user
You can set permissions of each user over the NVR's specific function and settings.
Setting the Administrator
You can set and change Administrator's ID and password.
The administrator can use and set all menu items and functions.
• ID : Change the admin ID.
• Password : Checks the current password.
• New P/W : Enter new password.
• Confirm P/W : Confirms the new password.
If <View password> is selected, the password will no longer be hidden on the screen when you type it.
`
The initial administrator ID is set to "admin" and you will need to configure the password in the installation wizard.
`
M
Please change your password every three months to safely protect personal information and to prevent the damage of the
`
information theft.
Please, take note that it's a user's responsibility for the security and any other problems caused by mismanaging a password.
If you click < >, a basic guide for password setup is displayed.
`
using Virtual Keyboard
1. For alphanumeric inputs, the virtual keyboard window appears.
2. Using a mouse, click on the desired character tab.
3. In the upper text input box of the virtual keyboard, there displays a list of
candidate words containing the selected character.
4. Select a word from the list, or use the keyboard to enter the whole word.
If there are many of candidate words, use <
`
and backward.
5. Select <OK>.
Entered word is applied.
For upper case letters, use <Caps Lock> button.
`
For special characters, use <Shift> button.
`
Using the virtual keyboard is the same to a normal keyboard use in your region.
`
ID allows alphanumeric characters only.
`
The password should at a minimum be an 8-digit combination of alphabetical letters and
`
numbers.
28_ menu setup
> buttons to move between them forward
user setting
You can create a group or set permissions for each group.
You can add a user and edit the registered user information.
If you want to add a group
1. Click on the [
] button to launch the Group Addition popup window.
If you want to add a group, click on <OK>.
2. Press the group name item to launch the virtual keyboard used to enter group names.
Enter the group name to register.
You can add a maximum of 10 groups.
`
If you want to set group permission
Set permission to access each group.
Each group's users can only access items with a check mark beside them.
1. Select the menu to set group permissions.
The menu with access permissions will appear when a user of the group logs in.
• Live View : You can set permissions to access the live screen for each channel.
• Search : You can set permissions to access the search menu for each channel.
• Backup : You can set permissions to access the backup menu for each channel.
• Menu : You can select and set the setting menu that can be accessed. A group user can only access the
menu selected. If you select the menu, the menu permission setting screen will be displayed.
• Record Stop, PTZ, Remote Alarm Out, Shutdown : You can select these functions to add to a group's
permissions.
2. Click <OK>.
Check a group user to give them the permission to access the selected item.