10
Audio
11
Backup
12
Playback
13
Emergency Rec.
14
Log
15
Setup
* The Audio sound output in live mode is based on the channel configuration in 'Menu-Audio'. It
has not same as current selected channel.
Live Screen division
Display live screen as 9 division (3x3), 4division (2x2), and single screen mode.
3x3 (9 Division)
To change layout, click right mouse button on live mode and select
camera or 'Lay out' menu.
Single Channel Live view
Enlarge selected channel as single full screen.
1. Move mouse to desired channel and double click left mouse button and it display single
channel view of selected channel
2. Press desired channel number on remote controller and it display single channel view of
selected channel
3. Click right mouse button on live view and select 'Camera' then select desired channel.
4. Double click again back to previous mode.
Backup
1. Click 'backup' button on remote controller
2. Click right mouse button and open contextual menu.
3. Select 'Backup' on menu and set storage and duration to archive
4. Press 'start' to backup.
Select audio channel
Playback recorded data
Move to search playback mode.
Start emergency recording.
Display current system log
Open setup menu
2x2 (4 Division)
20
Single screen mode